Accessories Parts
A full range of accessories and tube working tools is available from SUNGMO.
Each accessory and tool has the same high standard SUNGMO quility.
Tube Guide
Tube guide has tapered aluminum pilot with a replaceable nylon brush used to guide tube through tube sheets and support plate holes.
Speeds the assembly operation and prebents tube end damage during assembly. the nylon brush fits in the tube end, holding pilot firmly in place Brush also cleans tube where it will be rolled. Pilot is easlily removed by a slight twist.
Facing Tool
For Flat facing(FF type cutter) of ends of tubes from 12.7mm(5/8 in) to 57.1mm(2-1/4 in) O.D.(Standard range). A collar to rest against the tube sheet face gives constant tube end projection from the tube sheet.
Either electric or pneumatic drive can be emplyed.
Tube Spear
Tube Spear use which pullout tube.
Standard type spear ID size is from 9mm(3/8 in) to 26mm(1 in)
Shank 3/4" X 10G
Tube Cutter
Tube Cutter use which cut out inside tube.
Standard type Tube Cutter ID size is from 10mm(3/8 in) to 25mm(1 in)
Either electric or pneumatic drive can be emplyed.
Grooving Tool
Grooving Tool use which inside tube sheet makes groove.
Shank style is MT shank. No.2 and No. 3
Either radial mechine can be emplyed.
Grooving Cutter & Bushing
Standard type Grooving Cutter And Bushing.
Tool bushing accurately ositions the tool in the hole of the workpiece.
It is Essential that the bushing dimensions match the workpiece specifications. When ordering please specify the exact hole diameter.
Universal Joint
Universal Joint use that can be reached which hard to reach workpiece.
Drive Shaft & Extension Bar
Square type Drive Shaft and Extension Bar.